Manufacturer reference image. Included components and condition follow the selected item.

网络配件

900-13767-0010-001

NVIDIA Jetson Orin NX 8GB Production Module

P/N:900-13767-0010-001NVIDIA OPN: 900-13767-0010-001SwitchInfra item:7729品牌: NVIDIA
规格参数
imageNoteManufacturer reference image. Included components and condition follow the selected item.
CPU6-core 64-bit Arm Cortex-A78AE
DLA1 × NVDLA v2
GPUNVIDIA Ampere; 1,024 CUDA cores; 32 Tensor Cores
内存8 GB, 128-bit LPDDR5
CPU cache1.5 MB L2; 4 MB L3
AI computeUp to 117 sparse INT8 TOPS in Super mode
料号900-13767-0010-001
Product typeJetson Orin NX 8 GB production system-on-module
PCIe interfacePCIe Gen 4; 1 ×4 另含 3 ×1 configuration listed
Camera interface8 MIPI CSI-2 lanes; up to 4 cameras or 8 via virtual channels
External storageNVMe supported; external system storage required
Memory bandwidth102.4 GB/s
Module connector260-pin SO-DIMM
Module dimensions69.6 × 45 mm
Vision accelerator1 × PVA v2
Networking interface1 × Gigabit Ethernet capability
Maximum CPU frequencyUp to 2 GHz
Maximum GPU frequency1,173 MHz in the published Super configuration
Manufacturer lifecycleAvailable through January 2032
Production integrationCarrier, suitable cooling and power, external storage and flashed software required
Super-mode integrationCarrier HV rail and thermal design supporting 40 W are required
Manufacturer part number900-13767-0010-001

下单前确认

  • 确认准确的 SKU、料号、规格选项与数量。
  • 确认主机平台、端口、电气接口与固件兼容要求。
  • 付款前确认库存、交期、目的地与适用售后条款。
产品描述
The NVIDIA Jetson Orin NX 8 GB module, part number 900-13767-0010-001, is a compact production platform for carefully sized edge-AI workloads. It pairs an Ampere GPU with a six-core Arm CPU, one NVDLA engine and 8 GB of LPDDR5 memory. The 69.6 × 45 mm module is suited to evaluation for embedded vision and robotic sensing where memory use and system power are closely managed. Its published 117 sparse INT8 TOPS figure applies to Super mode; carrier capability, software configuration and cooling must be verified.

产品问答

What is included in the identity of 900-13767-0010-001?

This is the Jetson Orin NX 8 GB production module, with 8 GB LPDDR5, six CPU cores and one NVDLA engine. It is a different SKU from Orin NX 16 GB and from Orin Nano. A developer-kit carrier, SSD, enclosure or power supply must not be assumed from the module identity.

What conditions apply to the 117 TOPS specification?

117 TOPS is NVIDIA’s overall sparse INT8 rating for the 8 GB module in Super mode. The result depends on supported software and configuration, and it is not a measured application frame rate. Confirm memory fit and sustained inference timing using your actual workload.

Is the standard upper fixed power mode 20 W or 25 W?

The current product overview lists 25 W for the 8 GB column, while the detailed r39.2.1 power table lists 20 W and separately adds 40 W for Super. This record uses the release-specific 20 W table for configuration guidance and retains the discrepancy. Verify the deployed nvpmodel profile rather than assuming a 25 W preset.

What is needed to enable Super mode on an existing carrier?

NVIDIA requires an HV rail on the Orin NX carrier and a thermal design supporting 40 W, together with a supported software release and Super flash configuration. A software update alone does not establish that an arbitrary carrier and heatsink are suitable.

Does Orin NX 8 GB boot from an included microSD card?

The production module is not the Orin Nano developer-kit module with a microSD slot. NVIDIA specifies external NVMe support for Orin NX. Select compatible external storage, provide a carrier and flash the intended software image.

Does the camera specification guarantee eight physical camera connectors?

No. The specification describes up to four cameras, or eight through virtual channels, over eight CSI-2 lanes. The carrier must expose suitable interfaces, and sensors, drivers and virtual-channel support must match. It is not a claim that the module provides eight camera sockets or sustains every camera configuration.

可以先描述需求，型号、主机或数量尚未确定也能咨询。

渠道与项目资料

推进客户的下一步决策

从现有产品组合、产品系列或不完整的项目清单出发，选择与你的职责对应的资料。

OA03 · NVIDIA

AI Ethernet、网卡及光模块和线缆互连。

900-13767-0010-001

BOM 与待决项梳理

保留原始料号与数量，同时整理影响项目决策的待确认事项。

从这些信息开始
现有清单、上传的 BOM 或简要需求，不完整的清单也可以提交。
用于准备
保留原始行号、待补信息、责任人及下一动作的待决项表。
提交项目清单 →查看可转交资料包（英文）下载工作表