Manufacturer reference image. Included components follow the selected part number.
网络线缆
MCP7Y50-N002
NVIDIA MCP7Y50-N002
| 介质 | passive copper |
|---|---|
| imageNote | Manufacturer reference image. Included components follow the selected part number. |
| 电源规格 | 0.1 W per OSFP end |
| Connectors | OSFP to 4 x OSFP |
| 料号 | MCP7Y50-N002 |
| Branch count | 4 |
| Lane mapping | 8 x 100G-PAM4 at the head; 2 x 100G-PAM4 per branch |
| Thermal profile | fin to flat |
| Interconnect type | DAC |
| Branch data rate (Gb/s) | 200 |
| Nominal cable length (m) | 2.0 |
| Aggregate data rate (Gb/s) | 800 |
| Case temperature (degrees C) | 0 to 70 |
| Manufacturer lifecycle phase | P-Rel |
下单前确认
- 确认准确的 SKU、料号、规格选项与数量。
- 确认主机平台、端口、电气接口与固件兼容要求。
- 付款前确认库存、交期、目的地与适用售后条款。
产品问答
What is the speed of each OSFP branch?
Each of the four branches carries 200G using two 100G-PAM4 lanes; total head capacity is 800G.
Which adapter connector is required?
The explicit use-case guidance specifies ConnectX-7 OSFP adapters. A BlueField-3 or ConnectX-7 QSFP112 cage requires a QSFP112-ended cable.
What is different about -FLT?
The twin-port head has a flat-top thermal form. The official specification distinguishes this from the finned switch head; use the exact endpoint cooling design.
Are all variants at the same lifecycle stage?
No. Current exact rows mark selected flat-head variants Last Time Buy while the listed finned-head 1 m, 2 m and 3 m variants remain P-Rel. This does not establish stock.
Where does forward error correction take place?
The FAQ places FEC in the switch and network adapter. Match the supported endpoint configuration; a cable does not independently fix a FEC mismatch.
Why can a cable have two minimum bend radii?
The connector exit generally needs a larger bend radius than the cable body. Follow the exact assembly drawing and leave adequate space behind the rack door.
渠道与项目资料
推进客户的下一步决策
从现有产品组合、产品系列或不完整的项目清单出发，选择与你的职责对应的资料。
OA03 · NVIDIA
AI Ethernet、网卡及光模块和线缆互连。
980-9I46G-00N002
BOM 与待决项梳理
保留原始料号与数量，同时整理影响项目决策的待确认事项。
- 从这些信息开始
- 现有清单、上传的 BOM 或简要需求，不完整的清单也可以提交。
- 用于准备
- 保留原始行号、待补信息、责任人及下一动作的待决项表。
